Installing rear power window regulator

• Insert the power window regulator (3)  and tighten the nuts (2). 
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Power window to rear door
  	9.5 Nm

• Connect connector (1). 

  Courtesy of BMW OF NORTH AMERICA, INC.

• Check latch mechanism (1)  and the stop pad (2)  on the window guide (3)  for damage and replace if necessary.
• Press door window glass down into latch mechanism (1)  on the window guide (3). 

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE SOUND INSULATION ON THE REAR DOOR .
• Refer to INSTALLING THE LEFT OR RIGHT REAR DOOR TRIM PANEL .
• Refer to INSTALLING THE COVER ON THE REAR LEFT OR RIGHT DOOR HANDLE .
• Refer to INSTALLING THE REAR POWER WINDOW SWITCH .
• Refer to FUNCTIONAL CHECK OF THE POWER WINDOW .