LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2016 >> 328d >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Self Diagnosis - Diagnostic Trouble Codes (N47 & N57, Diesel) >> Fault Code Tests >> DTC U1117: BMW DTC Cd9902; DME -- Message Monitoring Speed Alive Check >> Condition for fault identification

Condition for fault identification

Supply voltage between 9 and 16 volts.

Terminal 15 on

PRD status: Driving

PRD status: Living

NOTE: The designations of terminal status or PRD status apply according to the vehicle electrical system of the vehicle.

The fault is logged after Terminal 15 has been hot for a maximum of ten seconds.

scientia non olet · About LEMON Manuals