51 61 Reinforcement, Body
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
51 61 REINFORCEMENT, BODY - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Suspension cross brace to body | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36/F87 | M10 | Replace screws. | |
| Tightening torque | 56 Nm | |||
| Angle of rotation | 90° | |||
| 2AZ Rear trailing link | F31/F34/F36 | M10 | Replace screw. | 56 Nm |
| M12 | Replace screw. | |||
| Tightening torque | 100 Nm | |||
| Angle of rotation | 90° | |||
| 3AZ Strut, front partition wall | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36/F87 | 19 Nm | ||
| 4AZ Front end strut to body | F23/F33/F87 | 28 Nm | ||
| 5AZ Diagonal strut to adapter plate | F33 | Tightening torque | 56 Nm | |
| Angle of rotation | 90° | |||
| 6AZ Torsion strut to front axle support | F23/F33 | M10 | Replace screws | |
| Tightening torque | 56 Nm | |||
| Angle of rotation | 45° | |||
| 7AZ Torsion strut to side member | F23/F33 | M12 | Replace screws | |
| Tightening torque | 100 Nm | |||
| Angle of rotation | 90° | |||
| 8AZ Rear tension strut to cross member of luggage compartment floor | F33/F23 | Replace screw | 56 Nm | |
| 9AZ Rear tension strut to support | F33/F23 | Replace screw. | ||
| Tightening torque | 100 Nm | |||
| Angle of rotation | 90° | |||
| 10AZ Rear tension strut to side member | F33/F23 | Replace screw | ||
| Tightening torque | 100 Nm | |||
| Angle of rotation | 90° | |||
| 11AZ Carbon brace on lock support | F80/F82/83 | Replace screw. | 28 Nm | |
| 12AZ Carbon brace on strut brace | F80/F82/F83 | Replace screw. | 28 Nm | |
| 13AZ Cross-brace to spring strut dome | F80/F82/F83 | M8 | 28 Nm | |
| 14AZ Cross-brace to side panel | F80/F82/F83 | M10 | 34 Nm | |
| 15AZ Cross-brace to firewall | F80/F82/F83 | M10x25 | Replace screw. | |
| Tightening torque | 56 Nm | |||
| Angle of rotation | 90° | |||
| 16AZ Cross-brace extension/additional strut to cross-brace | F80/F82/F83 | M8 | 28 Nm | |
| 17AZ Cross-brace extension to body | F80/F82/F83 | M10 | 56 Nm | |
| 18AZ Additional strut to cross-brace extension | F80/F82/F83 | M8 | 28 Nm | |
| 19AZ Torsion strut to front adapter plate | F23/F33 | M10 | Replace screw. | |
| Tightening torque | 56 Nm | |||
| Angle of rotation | 90° | |||
| 20AZ Torsion strut to body | F23/F33 | M8 | 19 Nm | |
| 21AZ Engine firewall, bottom to body | F20/F21 | M8x18 | 19 Nm | |
| 22AZ Rollover protection bar to body | F82 GTS | M8x16 | 19 Nm | |
| 23AZ Rollover protection bar to body | F82 GTS | M10x30 | 38 Nm |