12 63 586 Replacing power distribution module (N55 Hybrid)
WARNING:
High-voltage system - danger to life!
The following points must be strictly observed prior to starting work :
The following points must be strictly observed prior to starting work :
- Observe SAFETY INFORMATION for handling hybrid cars.
Necessary preliminary work:
- Switch off ignition.
- Disconnect battery negative lead.
- Disconnect BATTERY EARTH LEAD of auxiliary battery.
Unlock and pull off all connectors (1) from power distribution module.
Remove cover (2).
Release nut beneath it and set positive battery cable aside.
Tightening torque: 12 52 7AZ .
Release lock (3) in direction of arrow.
Feed out and remove power distribution module.
Reassemble the vehicle.