13 71 170 Removing air duct (N55 Hybrid)
WARNING:
High-voltage system - danger to life!
The following points must be strictly observed prior to starting work:
The following points must be strictly observed prior to starting work:
- Observe SAFETY INFORMATION for handling hybrid cars.
Necessary preliminary work:
- Remove INTAKE SILENCER HOUSING .
- Remove FAN COWL .
- Remove front UNDERBODY PROTECTION .
- Release COOLANT EXPANSION TANK and place to one side, do not drain coolant.
Unlock connector (1) and remove.
Release screw (2).
Pull off engine vent line (3) from air duct.
Release screw (1).
Tightening torque: 13 71 2AZ .
Slacken nut (2).
Tightening torque: 13 71 3AZ .
Pull off air duct (3) from exhaust turbocharger, feed out and remove.
Assemble engine.