11 00.. Removing and installing/replacing rear acoustic cover (corrosion protection) (B58)

Necessary preliminary work:

Removal:

Thread out acoustic cover (1) to top of the guides in the marked areas.

Fig 1: Identifying Acoustic Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Check acoustic cover (1) for cracks and damages.

Replace faulty acoustic cover (1).

Fig 2: Identifying Acoustic Cover For Cracks

Courtesy of BMW OF NORTH AMERICA, INC.

Position the acoustic cover (1).

NOTE: Pay attention to a correctly installed acoustic cover of the guides in marked areas.

Fig 3: Identifying Acoustic Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: