51 75 030 Removing or installing/replacing the sound insulation of the upper part of the bulkhead

Necessary preliminary tasks:

Detach positive wire from sealing (2).

Release expansion rivet (1).

Unclip sealing (2) in direction of arrow.

Fig 1: Detaching Positive Wire From Sealing

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Feed out sound insulation of upper part of bulkhead (2).

Installation note:

The gasket at the bottom of the sound insulation of the upper part of the bulkhead (2) must not be damaged.

Fig 2: Identifying Bulkhead Sound Insulation

Courtesy of BMW OF NORTH AMERICA, INC.