Storage Location

Individual

Consisting of:

1= 0492350 Bell housing

NOTE: For counter support when removing the rear wheel bearing Discontinued, can only be ordered as part of complete tool 33 4 030 (0492349).

2= 0492351 Spindle

NOTE: (spindle) Model series: E28 Replaced by 334301

3= 0492352 Washer

NOTE: (thrust washer) For removing wheel bearing, rear/model series: E28/model: 518, 528i. Discontinued, can only be ordered as part of complete tool 33 4 030 (0492349).

Fig 1: Identifying Tool (334030)

Courtesy of BMW OF NORTH AMERICA, INC.

4= 0492353 Holding sleeve

NOTE: (guide sleeve) For installing wheel bearing, rear/model series: E28/model: 518, 520i. Discontinued, can only be ordered as part of complete tool 33 4 030 (0492349).

5= 0492354 Washer

NOTE: (thrust washer) For installing wheel bearing, rear/model series: E28/model: 518, 520i Discontinued, can only be ordered as part of complete tool 33 4 030 (0492349).

6= 0492355 Holding sleeve

NOTE: (guide sleeve) For installing wheel bearing, rear/model series: E28/model: 525i, 528i. Discontinued, can only be ordered as part of complete tool 33 4 030 (0492349).

7= 0492356 Washer

NOTE: (thrust washer) For installing wheel bearing, rear/model series: E28/model: 525i, 528i Discontinued, only available via complete tool

8= 0492357 Nut

NOTE: (Nut with bearing) Model series: E28 Replaced by 334302

9= 0492358 Nut

NOTE: (Nut) replaced with 334303