SI number

01 05 90 (207)

Consisting of:

1= 0492265 Bush

NOTE: For accommodating the engine support arm or wheel carrier when pressing out the ball joint

2= 0492266 Synchronizing key

NOTE: For pressing the ball joint out of the engine support arm or wheel carrier

3= 0492267 Holding sleeve

NOTE: (Spacer sleeve) For pressing the ball joint into the support arm

3= 0492268 Holding sleeve

NOTE: (Spacer sleeve) For pressing the ball joint into the wheel carrier

Fig 1: Identifying Tool (333210)

Courtesy of BMW OF NORTH AMERICA, INC.