11 21 Crankshaft and Bearings (1 of 2)
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - CRANKSHAFT AND BEARINGS
| |
Type |
Thread |
Tightening specifications |
Dimension |
| 1AZ Torsion damper (hub) to crankshaft (central bolt 12.9) |
N20/N26 |
M18x108 |
Replace screw
Lightly oil screw and thread
Jointing torque
Angle of rotation |
100 Nm
270 ° |