11 51 Coolant pump with drive
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - COOLANT PUMP WITH DRIVE
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Coolant pump to front axle support | N20/N26 | M8 | 19 Nm | |
| 2AZ Coolant pump to crankcase | N20/N26 | M8 | 22 Nm | |
| 3AZ Coolant hose between coolant pump and coolant thermostat. | N20/N26 | L42-48 | 3 Nm | |
| 4AZ Coolant hose between coolant pump and feed line. | N20/N26 | L42-48 | 3 Nm |