26 11 Propeller Shaft, flexible disc
WARNING: This page is about a different variant/trim than selected.
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Flexible disc to transmission output flange ZNS screws and nuts Shiny zinc coating All versions |
NOTE: Replace bolts and nuts. Jointing torque and angle of rotation must be observed! | |||
| E60/E61/E63/E64/E85/E86/E87/E90/E91/E92/E93/E81/E82/E83/E84/E88/E89 | M10-10.9 | Jointing torque Torque angle |
20 Nm 90 ° |
|
| E46/E53/E60/E61/E63/E64/E65/E85/E86/E87/E90/E91/E92/E93/E70/E71/E72/E81/E82/E83/E84/E88/E89 | M12-10.9 | Jointing torque Torque angle |
55 Nm 90 ° |
|