232050 Puller AM

WARNING: This page is about a different variant/trim than selected.

NOTE: (Rillex ball bearing puller 6205) For pulling out the grooved ball bearing from the transmission countershaft and the transmission output shaft

Consisting of:

1 = 0491550 Claw

NOTE: (Claw for Rillex 6305 (8 pieces))

Fig 1: Identifying Puller AM (232050)

Courtesy of BMW OF NORTH AMERICA, INC.

2 = 0491551 Holding sleeve

NOTE: (Union sleeve)

3 = 0491552 Spindle

NOTE: (Pressure spindle)