24 11 Transmission housing, transmission oil sump (3 of 3)
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - TRANSMISSION HOUSING AND TRANSMISSION OIL SUMP
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Transmission extension | A4s 200R/A5S 300J/A5S 310Z/A5S 325Z/A5S 440Z/A5S 560Z/A5S 390R/GA6HP19Z/GA6HP26Z/GA6HP32Z | M8 | 25 Nm | |
| A4S 270R/A4S 310R | 5/16 inch | 32 Nm | ||
| A5S 360R/A4S 360R | M8 | 22 Nm | ||
| 2AZ Guard | A4s 200R/A5S 300J/A5S 310Z/A5S 325Z/A5S 440Z/A5S 560Z/A5S 390R/GA6HP19Z/GA6HP26Z/GA6HP32Z | M6 | 9 Nm | |
| 3AZ Converter housing | A4s 200R/A5S 300J/A5S 310Z/A5S 325Z/A5S 440Z/A5S 560Z/A5S 390R/GA6HP19Z/GA6HP26Z/GA6HP32Z | M8 | 25 Nm | |
| 4HP-22/4HP-24 | M10 | 46 Nm | ||
| A4S 270R/A4S 310R | 1/2 inch | 42 Nm | ||
| 4AZ Screw plug to intermediate plate | A4s 200R/A5S 300J/A5S 310Z/A5S 325Z/A5S 440Z/A5S 560Z/A5S 390R/GA6HP19Z/GA6HP26Z/GA6HP32Z | M10 | 16 Nm | |
| 4HP-22/4HP-24 | M14 | 40 Nm | ||
| 4HP-22/4HP-24 | M20 | 50 Nm | ||
| A5S 440Z | M12 | 23 Nm |