Storage Location

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Puller AM (112020)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

1 = 0490813 Claw

NOTE: (Extraction claw I) With threaded bush

2 = 0490814 Claw

NOTE: (Extraction claw II)

3 = 0490815 Spindle

NOTE: (Pressure spindle)

4 = 0490816 Holding sleeve

5 = 0490817 Bush

NOTE: (Threaded bush)