SI number

WARNING: This page is about a different variant/trim than selected.

00 01 00 (549)

Consisting of:

1 = 0493778 Base frame

Fig 1: Identifying Special Tool Cabinet AM (000220)

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: (basic frame) Basic frame with roller-blind for constructing a separate 2 m long tool cabinet.

NOTE: For an individual order as an attachment frame, the complete delivery specification must already be present under order number 00 0 220 Overall length with a mounting frame: 4 m

2 = 0493779 Side wall

NOTE: (side wall) Left side wall. Only required once to set up the base frame, discontinued, available as part of set of special tools only

3 = 0493780 Side wall

NOTE: (side wall) Right side wall. Only required once to set up the base frame, discontinued, available as part of set of special tools only

4 = 0493781 Special tool board

NOTE: (large special tool board 2 m x 1 m) This special tool board is used as the rear panel of basic and attachment frames and is the basis for large fixed or movable special tool boards.

5 = 0493782 Roller sunblind

NOTE: (roller-blind) Lockable Is included in the 00 0 221 delivery specification.

This order number is for reordering purposes only. Discontinued, can only be ordered using complete tool

6 = 0494126 Frame

NOTE: (Side frame) Only required once for constructing the base frame Deletion, only available via tool set