63 14 060 Removing and installing/replacing the front left or right side marker: Notes
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Partially remove FRONT WHEEL ARCH COVER (front section)
NOTE:
Minimum object temperature of side marker and bumper panel ≥ 18 °C.
If this temperature is not achieved, the components must be preheated.
Release expanding rivets (1) and pull air duct (2) in direction of arrow out of guide (3).