16 12 010 Removing and installing/replacing carbon canister (US version)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove rear right WHEEL ARCH COVER

Disconnect plug connection (1).

Unlock quick-release fasteners (2) and disconnect vent lines.

Release screws (3) and swing out carbon canister (4).

Installation:

Tightening torque: see 1AZ in 16 13 TANK VENTILATION

The following components must be modified when the carbon canister is replaced:

DUST FILTER
DIAGNOSIS MODULE

Fig 1: Identifying Carbon Canister, Quick-Release Fasteners, Plug Connection And Screws

Courtesy of BMW OF NORTH AMERICA, INC.