LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2015 >> Z4 sDrive35is >> Repair and Diagnosis >> External Pages >> Different car >> Section 750 (Cooling System - Repair) >> Coolant, Checking Cooling System >> 17 00... Instructions for repair work on cooling system >> Recycling

17 00... Instructions for repair work on cooling system: Recycling

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

Catch and dispose of drained coolant.

Observe country-specific waste disposal regulations.

NOTE: To disconnect coolant hoses, use commercially available disconnect tools such as HAZET brand tools (see table below).
Fig 1: Identifying Pliers
G06853582Courtesy of BMW OF NORTH AMERICA, INC.
HAZET no.: Designation
4590-1 Disconnect-pliers, length (mm): 150
4590-2 Disconnect-pliers, length (mm): 180
4590-3 Disconnect-pliers, length (mm): 253
4590 / 2 Disconnect-plier set
4590 / 3 Disconnect-plier set
NOTE: Tightening torque for hose clamps
WAF 5 1.0 - 1.5 Nm
WAF 6 2.5 - 3.5 Nm
Fig 2: Locating Hose Clamp Mounting Bolt
G04725824Courtesy of BMW OF NORTH AMERICA, INC.