61 12 062 Replacing wiring harness for front bumper
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Read and comply with notes on HANDLING WIRING HARNESSES
and cables.
Necessary preliminary tasks:
- Remove FRONT BUMPER TRIM .
Disconnect plug connections (1) on five ultrasonic transducers.
Unclip wiring harness (2) from bumper trim.
Remove wiring harness (2).
Remove Park Distance Control ultrasonic sensors. See FRONT LEFT PDC SENSOR , FRONT RIGHT PDC SENSOR , FRONT CENTER-LEFT PDC SENSOR , FRONT CENTER-RIGHT PDC SENSOR , and FRONT CENTER PDC SENSOR .
Installation:
Make sure wiring harness (2) is laid correctly.