LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2015 >> Z4 sDrive35is >> Repair and Diagnosis >> External Pages >> Different car >> Section 729 (Slide/Tilt Roof And Convertible Top - Tightening Torques) >> 5412 Mechanical Components, Slide/Tilt Sunroof >> 54 12 Mechanical components, slide/tilt sunroof

54 12 Mechanical components, slide/tilt sunroof

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - MECHANICAL COMPONENTS, SLIDE/TILT SUNROOF

  Type Thread Tightening specifications Dimension
1AZ Glass slide / tilt sunroof panel to gate F01 / F02 / F04 / F10 M5x6 w/Washer   5 ±0.5 Nm
F07 / F11 / F20 / F25     4.5 Nm
2AZ Cassette to body F01 / F02 / F04 / F10   Self-locking 7.6 Nm
F07 / F11 / F20 / F25   Screws, self-tapping 5.4 Nm
3AZ Floating headlining to sliding rail F01 / F02 / F04 / F10 / F11 M5x6 Observe screwing sequence 2 ±0.2 Nm
4AZ Carriage, water channel, to connecting element F01 / F02 / F04 / F10     3.8 Nm
5AZ Panorama glass roof rear section - active and passive elements F07 / F11 / F25     5.4 Nm
6AZ Both floating roofliners to gate F11     2.0 Nm
7AZ Stacker for floating roofliner F11     2.0 Nm
8AZ Water gutter to glass lid mechanism F11     2.0 Nm
9AZ Wind deflector to cross-member F25   Tighten screw with special tool 00 9 250 to 0.8 Nm. 0.8 Nm
10AZ Stop screw F11   . 2 Nm