33 55 Anti-roll bar
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - ANTI-ROLL BAR
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Retaining bracket, anti-roll bar to rear axle support | F01 / F02 / F03 / F04 / F07 / F06 / F10 / F11 / F12 / F13 / F18 | M10 | Replace screws. | 56 Nm |
| F25 | M8 | Replace screw. | 34 Nm | |
| 2AZ Anti-roll bar link to anti-roll bar/swinging arm | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 / F25 | M10 | Replace nuts. | 56 Nm |
| F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 | M12 | Replace nuts. | ||
| Jointing torque | 45 Nm | |||
| Angle of rotation | 45 ° | |||
| 3AZ Vibration absorber to anti-roll bar bracket | F01 / F02 / F06 / F07 / F10 / F11 / F12 | Replace screw. | 19 Nm | |
| 4AZ Anti-roll bar link to wheel carrier | F25 | M10 | Replace screw. | 56 Nm |