51-4100 Tool

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

0496530 514100 Tool MW

NOTE: (punching tool) For punching the recess for the seat memory switch, when replacing the front and rear door trim Supplied complete in plastic case. [Released]

SI number

01 18 08 (482)

Consisting of:

13 = 0496783 Die-plate

Fig 1: Identifying Tool (0496530)
Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: [Released]
12 = 0496636 Nut
NOTE: As alternative for 51 4 106 with restricted installation space Only available as part of complete tool set 51 4 100 (83 30 0 496 530). [Not available separately]
14 = 0496784 Tool
NOTE: Cutting punch for front door seat memory switch [Released]
11 = 0496550 Hexagon socket
NOTE: (Hexagon socket wrench) 6 mm Only available as part of complete tool set 51 4 100 (83 30 0 496 530). [Not available separately]
10 = 0496549 Outpusher
NOTE: (Ejector) For removing residual punched portions from cutting matrix. Only available as part of complete tool set 51 4 100 (83 30 0 496 530). [Not available separately]
9 = 0496548 Tool
NOTE: (Arc punch) size 12 mm Only available as part of complete tool set 51 4 100 (83 30 0 496 530). [Not available separately]
8 = 0496547 Template
NOTE: For rear door trim F02 Only available as part of complete tool set 51 4 100 (83 30 0 496 530). [Not available separately]
7 = 0496546 Template
NOTE: For rear door trim F01 Only available as part of complete tool set 51 4 100 (83 30 0 496 530). [Not available separately]
6 = 0496545 Nut
NOTE: (Wing nut) M12 Only available as part of complete tool set 51 4 100 (83 30 0 496 530). [Not available separately]
5 = 0496544 Washer
NOTE: (Thrust washer) Only available as part of complete tool set 51 4 100 (83 30 0 496 530). [Not available separately]
4 = 0496543 Tool
NOTE: (Cutting punch) top for F01 / F02 Only available as part of complete tool set 51 4 100 (83 30 0 496 530). [Not available separately]
3 = 0496542 Die-plate
NOTE: (Cutting matrix) bottom for F01 / F02 Only available as part of complete tool set 51 4 100 (83 30 0 496 530). [Not available separately]
2 = 0496541 Tool
NOTE: (Top yoke) Only available as part of complete tool set 51 4 100 (83 30 0 496 530). [Not available separately]
1 = 0496540 Tool
NOTE: (Bottom yoke) Only available as part of complete tool set 51 4 100 (83 30 0 496 530). [Not available separately]