24-2350 Puller

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

0494201 242350 Puller Minimum set: Mechanical tools MW

NOTE: For pulling out the radial shaft seal on torque converter and on output flange [Released]

Storage Location

A46

SI number

01 14 01 (766)

Consisting of:

Fig 1: Identifying Puller (0494201)

Courtesy of BMW OF NORTH AMERICA, INC.

= 0494202 Puller
NOTE: [Discontinued]
= 0494203 Spindle
NOTE: (Spindle M12 x 65 with ball head) Discontinued, only available via complete tool [Not available separately]
= 0494204 Synchronizing key
NOTE: [Discontinued]
= 0495597 Synchronizing key
NOTE: Transmission: GA6L45R (GM6) Liquidation of existing inventory and then available only as a complete tool set 24 2 350 (83 30 0 494 201) - as of 06.06.2012. [Not available separately]