66 33 008 Removing and installing / replacing park assist control unit

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work:

Remove RIGHT LUGGAGE COMPARTMENT WHEEL ARCH PANEL .

Unlock plug connection (1) and disconnect.

Pull out parking maneuvering assistant control unit (2) towards top out of mounting (3).

Fig 1: Identifying Control Unit, Mounting, And Connector

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out PROGRAMMING/ENCODING .