37 12 012 Carrying out ride height adjustment

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Ride height adjustment must be carried out after the following work:

Removal/replacement of ride height sensor or its control rod (only necessary on vehicles with air suspension)
Replacement of EHC control unit
Replacement of ICM control unit (Integrated Chassis Management)

Connect BMW diagnosis system.

Switch the ignition on.

Carry out ride height adjustment (menu item: "Service function").

IMPORTANT: Following ride height adjustment, for vehicles with:

Run Flat Indicator: Initialize RUN FLAT INDICATOR .
Tire Pressure Monitor: Perform TIRE PRESSURE CONTROL (RDC) RESET .