65 77 604 Replacing sensor mat (OC3 mat) for front passenger seat occupancy detection (up to production date 08/2009)
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Version with OC3 mat up to version (build date) 08/09.
From version (build date) 09/09, see version with CIS MAT .
WARNING:
Note AIRBAG SAFETY REGULATIONS !
Incorrect handling can activate the airbag and cause injury.
WARNING:
US/CDN front passenger seat (with OC3 mat) only:
A faulty OC3 mat can only be removed in conjunction with the upholstery from the seat cover.
If OC3 mat or upholstery is defective, both parts may only be replaced together.
After fitting seat cover, enable OC3 mat with BMW PROGRAMMING SYSTEM .
The operation for removing the OC3 mat in conjunction with the upholstery is described in:
- Replacing seat cover for front passenger seat. See:
Enabling seat occupancy detector (OC3 mat):
- Connect BMW PROGRAMMING SYSTEM .
- Encode airbag control unit.
- Delete fault memory if necessary.