67 65 019 Removing and installing/replacing drive for left or right roller sun blind

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove DOOR TRIM PANEL .

Release screws (1).

Tightening torque 51 16 20AZ .

Release screw (2).

Tightening torque 51 16 19AZ .

Fig 1: Identifying Door Window Mounting Screws

G06885496

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten plug connection (1) and disconnect.

Pull flex shaft out of drive.

Installation:

Make sure flex shaft is correctly seated in drive.

Fig 2: Identifying Plug Connection

G06885497

Courtesy of BMW OF NORTH AMERICA, INC.

Withdraw flex shaft (1) from gearing (2).

Installation:

Make sure flex shaft (1) is correctly seated in gearing (2).

Fig 3: Identifying Flex Shaft And Gearing

G08510332

Courtesy of BMW OF NORTH AMERICA, INC.