LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2015 >> Z4 sDrive35is >> Repair and Diagnosis >> External Pages >> Different car >> Section 571 (Body Equipment - Repair) >> Windshield And Rear Window >> 51 31... Removing windscreen with "Roll Out 2000" >> Using wire starter

Using wire starter

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Bend wire end approx. 10 mm and insert in notched tip.

Pierce wire starter with uniform pressure through adhesive bead, wire end (bent part) must be positioned on window glass.

Fig 1: Bending Wire End Using Wire Starter
G08511658Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals