Attaching wire in hoisting winch with double coil
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
- Bend over cutting wire end (1) approximately 10 mm and insert into slot of spool (2)
- Repeat process with other end of wire (1) and second spool (2)
- Wind cutting wire (1) onto spools by hand until cutting wire (1) is under slight tension