LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2015 >> Z4 sDrive35is >> Repair and Diagnosis >> External Pages >> Different car >> Section 571 (Body Equipment - Repair) >> Hood Latch, Locks >> 51 23 265 Removing and installing/replacing left or right gas pressure spring for engine compartment lid

51 23 265 Removing and installing/replacing left or right gas pressure spring for engine compartment lid

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Danger of injury and damage!
For the following tasks, you must take the appropriate measures to support the engine compartment lid.
As an alternative, you can enlist the help of a second person to hold the engine compartment lid.

Make a written record of the installation position of the gas pressure spring(s) before removing.

Carry out BALL SOCKET REMOVAL  at both ends (1) of gas pressure spring (2).

Fig 1: Identifying Ball Socket And Gas Pressure Spring
G06885646Courtesy of BMW OF NORTH AMERICA, INC.