LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2015 >> Z4 sDrive35is >> Repair and Diagnosis >> External Pages >> Different car >> Section 571 (Body Equipment - Repair) >> Gaskets/Seals, Loose Body Components >> 51 71... Installing and removing/replacing vehicle hoist mounting

51 71... Installing and removing/replacing vehicle hoist mounting

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required: 

Insert special tool 51 3 330 between vehicle hoist mounting (1) and vehicle underbody (2) and remove.

IMPORTANT: Risk of corrosion!
Touch up paintwork damage.
Re-establish wax layer.
Fig 1: Removing Vehicle Hoist Mounting And Vehicle Underbody Using Special Tool (51 3 330)
G06885979Courtesy of BMW OF NORTH AMERICA, INC.