LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2015 >> Z4 sDrive35is >> Repair and Diagnosis >> External Pages >> Different car >> Section 571 (Body Equipment - Repair) >> BMW Emblems, Model Emblems >> 51 14 111 Replacing model name plate, rear >> Replacing model designation (new or newly painted tailgate)

Replacing model designation (new or newly painted tailgate)

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Transfer position of model designation (1) from old tailgate by making an adhesive tape template.
For paintwork, keep adhesive tape template up to installation.
Fig 1: Identifying Model Designation And Masking Tape
G08511362Courtesy of BMW OF NORTH AMERICA, INC.

Stick masking tape (2) to nearby reference edges of tailgate and therefore determine position of model designation (1).

Pull off masking tape (2) completely and stick to same reference edges of new/painted tailgate.

Check position, realign if required.

scientia non olet · About LEMON Manuals