61 71 030 Removing and installing/renewing all washer jets of windscreen washer system

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Turn clamp (3) in direction of arrow and washer fluid line (2) in direction of arrow.

Disconnect plug connection (1) and remove from holder (4).

Fig 1: Turning Washer Fluid Line Clamp

Courtesy of BMW OF NORTH AMERICA, INC.

Press all washer jets (1) in direction of arrow upwards and remove.

Fig 2: Pressing Washer Jets

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Retaining lugs (1) must not be damaged.
Check ADJUSTMENT OF WASHER JETS and correct if necessary.
Observe FILLING CAPACITY FOR WINDSCREEN WASHER SYSTEM .

Fig 3: Identifying Retaining Lugs
Courtesy of BMW OF NORTH AMERICA, INC.