LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2015 >> Z4 sDrive35is >> Repair and Diagnosis >> External Pages >> Different car >> Section 549 (Integrated Suspension Systems - Tightening Torques) >> Control And Suspension Systems, Rear >> 37 12 Control and Suspension Systems, rear

37 12 Control and Suspension Systems, rear

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - CONTROL AND SUSPENSION SYSTEMS, REAR

  Type Thread Tightening specifications Dimension
1AZ Screwed connection, air line F01 / F02 / F04 / F07 / F11 Dia. = 4 mm   2 Nm
2AZ Retaining bracket, anti-roll bar to rear axle support F01 / F02 / F06 / F04 / F07 / F10 / F11 / F12 / F13 / F18 M10   56 Nm
4AZ Air spring strut to body F01 / F02 / F04 M8   28 Nm
5AZ Air spring strut to wheel carrier F01 / F02 / F04 M16   250 Nm