LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2015 >> Z4 sDrive35is >> Repair and Diagnosis >> External Pages >> Different car >> Section 545 (Rear Axle - Repair) >> Final Drive With Cover >> 33 11... Removing and installing/replacing vibration absorber >> Vibration absorber to anti-roll bar, right

Vibration absorber to anti-roll bar, right

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Release screws (1).

Tightening torque 33 55 3AZ

Remove vibration absorber (2).

Installation note: 

Replace screw.

Fig 1: Identifying Anti-Roll Bar Vibration Absorber And Screws
G08484378Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals