33 34 Integral Active Steering
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - INTEGRAL ACTIVE STEERING
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Integral active front steering to rear axle carrier (Torx screw) | F01 / F02 / F06 / F07 / F10 / F11 / F12 / F13 / F18 | M14 | 165 Nm | |
| 2AZ Integral active front steering to rear axle carrier (bottom) | F01 / F02 / F06 / F07 / F10 / F11 / F12 / F13 / F18 | M12 | Jointing torque | 100 Nm |
| Angle of rotation | 90 ° | |||
| 3AZ Integral active front steering to rear axle carrier (press-in stud) | F01 / F02 / F06 / F07 / F10 / F11 / F12 / F13 / F18 | M14 | 165 Nm | |
| 4AZ Grounding strap to integral active front steering | F01 / F02 / F06 / F07 / F10 / F11 / F12 / F13 / F18 | M6 | 8 Nm | |
| 5AZ Control unit, integral active front steering, to body | F01 / F02 / F06 / F07 / F10 / F11 / F12 / F13 / F18 | M6 | 5.7 Nm |