Spur gear
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Installation note:
IMPORTANT:
The following must be observed without fail:
- Spur gearing of bearing (1) and output shaft (2) must be installed tooth in tooth!
- Tighten collar bolt with compression spring by hand.
- Check whether spur gearing is locked tooth in tooth by reciprocally rotating wheel hub/output shaft.
- Tighten collar bolt.
Tightening torque 31 60 2AZ .