LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2015 >> Z4 sDrive35is >> Repair and Diagnosis >> External Pages >> Different car >> Section 522 (Steering And Wheel Alignment - Repair) >> Electronic Chassis Alignment >> 32 00 620 Adjusting rear axle >> Adjusting on swinging arm

Adjusting on swinging arm

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Replace nut (1) prior to adjustment and join to 5 Nm.

Turn eccentric bolt (2) to adjust setpoint value.

Tighten nut (1).

Tightening torque 33 32 2AZ.

Fig 1: Identifying Swinging Arm Nut And Eccentric Bolt
G06889621Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals