84 10 050 Removing and installing (replacing) USB hub

WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD PROTECTION) .

Necessary preliminary tasks

Remove COMPLETE CENTRE CONSOLE

Unlock plug connections (1) and disconnect.

Unlock plug connections (2) and disconnect.

Release screws (3) and remove USB hub (4).

Fig 1: Identifying USB Hub With Plug Connections And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out vehicle programming/encoding with scan tool.