51 13 Trim Parts, Covers, Handle Trim
WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - TRIM PARTS, COVERS, HANDLE TRIM
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Bracket, roof luggage rack on body | E39/E46/E81/E82/E87/E90/E91/E92/E36/Z3 and M Coupe | M10 | 20 Nm | |
| 2AZ | Water drain to body (plastic nut) | E46 | 1 Nm | ||
| Water drain to body (metal nut or rivet nut) | E46 | 1.8 Nm | |||
| 3AZ | Roof railing to body | E39 | Centre, front, rear | 24 Nm | |
| E61 | M8 | 16 Nm | |||
| settling time Check | 15 min 16 Nm | ||||
| E83 | M8 | Front | |||
| Jointing torque | 21 Nm | ||||
| Release nut after settling time | 15 min | ||||
| Jointing torque | 21 Nm | ||||
| Torque angle | 120 ± 10° | ||||
| E83 | M8 | Centre, rear | 21 Nm | ||
| settling time Check | 15 min 21 Nm | ||||
| E84 | 19 Nm | ||||
| E91 | 25 Nm | ||||
| E70 | 19 Nm | ||||
| E71/E72 | 16 Nm | ||||
| 4AZ | Handle strip to rear lid | E39/Touring | 3 Nm | ||
| E46/E53 | 2.5 Nm | ||||
| E83 | 1.8 Nm | ||||
| 5AZ | Cowl panel cover to body | E60/E61/E63/E64 | 2.5 Nm | ||
| 6AZ | Centre trim to rear lid | E65/E66/E67 | M8 | 2.5 Nm | |
| 7AZ | Trim to engine compartment lid | E90/E91 | 2 Nm | ||
| 8AZ | Additional brake light to rear lid | E89 | 5 Nm | ||
| 9AZ | Threaded bolt on sliding carriage (roof railing) | E84 | 15 Nm | ||
| 10AZ | Decorative trim, side, to cowl panel | E88/E93 | 1.8 Nm | ||