51 23 Hood/bonnet locks
WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - HOOD/BONNET LOCKS
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Retaining hook to engine hood/bonnet (replace microencapsulated screws) | E46/E52/E53/E60/E61/E63/E64/E65/E66/E83/E85/E86/E89 | 10 Nm | ||
| E38/E39 | 12 Nm | ||||
| E36 | Hexagon screw | 10 Nm | |||
| Torx bolt | 12 Nm | ||||
| 2AZ | Lock to body (replace microencapsulated screws) | E36/E38/E39/E46/E52/E53/E60/E61/E63/E64/E83 | 10 Nm | ||
| E65/E66/E85/E86 | 8 Nm | ||||
| E89 | 12 Nm | ||||
| 3AZ | Lock to engine hood/bonnet (replace microencapsulated screws) | E36/E46/E52 | 10 Nm | ||
| E39 | 12 Nm | ||||