41 35 Side walls
WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - SIDE WALLS
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Front side panel to body | E63/E64 | M6x22 10.9 | 12 Nm | |
| E83 | ST6.3x14 | 7 Nm | |||
| E60/E61/E81/E82/E85/E86/E87/E88/E90/E91/E92/E93/E84 | M6 | 7.6 Nm | |||
| E89 | M6 | 8 Nm | |||
| 2AZ | Front side panel to body | E63/E64 | M6 nut | 5 Nm | |
| E60/E61 | M6 nut | 7.6 Nm | |||
| E89 | M6 nut | 8 Nm | |||
| 3AZ | Front side panel to body | E60/E61 | Sheet metal screw ST4.8x19 | 7.6 Nm | |
| 4AZ | Combination holder, side panel, front, to body | E81/E82/E87/E88/E92 | M6 | 7.6 Nm | |
| 5AZ | Rear side panel to body | E85/E86/E89 | M6 | 7.6 Nm | |
| 6AZ | Side panel, front, to module carrier/bumper carrier | E70/E71/E72 | M6x16 | Replace bolts | 4 Nm |
| 7AZ | Front side panel to body Area, A-pillar | E70/E71/E72 | M6x16 | Replace bolts | 8 Nm |
| 8AZ | Front side panel to body Area, sill | E70/E71/E72 | Sheet metal screw ST4.8x19 | Replace bolts | 2.5 Nm |
| 9AZ | Front side panel to body | E70/E71/E72 | M5x20 | Replace bolts | 5 Nm |
| 10AZ | Module carrier, top, to Carrier support | E70/E71/E72 | M6x26 | Replace bolts | 8 Nm |
| 11AZ | Module carrier, bottom, to engine support | E70/E71/E72 | M6 nut | 7 Nm | |