33 52 000 Removing and installing/replacing rear left or right shock absorber: Replacement

WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Remove SUPPORT BEARING .

Remove or detach plate (1), spacer, auxiliary damper (2) and protective tube (3) from shock absorber (4).

Installation:

Check auxiliary damper (2) and protective tube (3) for damage, replace if necessary.

Fig 1: Identifying Shock Absorber With Plate, Damper And Protective Tube

Courtesy of BMW OF NORTH AMERICA, INC.