51 47 491 Removing and installing/replacing rear underbody protection

WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Scalding hazard!
This work may only be carried out on an exhaust system which has cooled down.

Release screws (1).

Pull underbody protection (2) out from under bumper trim (3).

Fig 1: Identifying Underbody Protection, Under Bumper Trim With Screws

Courtesy of BMW OF NORTH AMERICA, INC.