25 16 Shift Console - Automatic Transmission
WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - SHIFT CONSOLE - AUTOMATIC TRANSMISSION
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Bowden cable to shift tower/transmission | E36/E38/E39/E46/E53/E60/E61/E63/E64/E65/E66/E67/E68/E83/E85/E86/E87/E90/E91/E92/E81/E82/E88 | 15 Nm | ||
| 2AZ | Clamping screw on shift lever | E36/E38/E39/E46/E53/E60/E61/E63/E64/E65/E66/E67/E68/E83/E85/E86/E87/E90/E91/E92/E93/E81/E82/E88/E89/E84 | 10 Nm | ||
| 3AZ | Shift console to tunnel | E36/E38/E39/E46/E53/E60/E61/E63/E64/E65/E66/E67/E68/E83/E85/E86/E87/E90/E91/E92/E93/E81/E82/E88/E89/E84 | 7 Nm | ||
| 4AZ | Switch to shift console | E36/E38/E39/E46/E53/E60/E61/E63/E64/E65/E66/E67/E68/E83/E85/E86/E87/E90/E91/E92 | 4.5 Nm | ||
| 5AZ | Interlock cable to shift tower | E36/E38/E39/E46/E53/E60/E61/E63/E64/E65/E66/E67/E68/E83/E85/E86 | 7 Nm | ||
| 6AZ | Cable retaining tab to transmission | E91/E92 4WD | M8X18 | 19 Nm | |
| 7AZ | Oval-head screw for emergency release device | E60, E61 | 1.6 Nm | ||
| 8AZ | Screw for adjusting cable on transmission | E60/E61/E81/E82/E83/E84/E87/E88/E90/E91/E92/E93 | With ball head | 13 Nm | |
| 9AZ | Vulcanised support angle to transmission | E81/E82/E87/E88/E90/E91/E92/E93/E84 | M6 | 9 Nm | |