22 11 100 Replacing right engine support arm (N54)
WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks
- Secure engine in INSTALLATION POSITION
- Remove REAR UNDERBODY PROTECTION and FRONT UNDERBODY PROTECTION .
- Remove both catalytic converters. See 1832050 REMOVING AND INSTALLING/REPLACING CATALYTIC EXHAUST-GAS CONVERTER FOR CYLINDERS 1-3 (N54) or 1832060 REMOVING AND INSTALLING/REPLACING CATALYTIC EXHAUST-GAS CONVERTER FOR CYLINDERS 4-6 (N54) .
Release screws (1).
Remove engine support arm from engine.
Tightening torque 22 11 3AZ