13 11 Carburetor
WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - CARBURETOR
| Type | thread | tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Carburetor to intake manifold | M10/M20/M30 | 10 Nm | ||
| 2AZ Carburetor to insulating flange | M10/M20/M30 | 10 Nm | ||
| 3AZ Insulating flange to intake manifold | M10/M20/M30 | 10 Nm | ||
| 4AZ Idling shut off valve; max. | M10/M20/M30 | 5 Nm | ||
| 5AZ Flow valve; max. | M10/M20/M30 | 28 Nm | ||
| 6AZ Throttle valve assembly to float housing; max. | M10/M20/M30 | 9 Nm | ||
| 8AZ Throttle valve control to carburetor; max. | 2BE | 3 Nm | ||
| 9AZ Warm-up regulator to engine | M10/M20/M30 | 23 Nm |