Infrared lamp and infrared temperature measuring device
WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.
An infrared lamp with stand and an infrared temperature measuring device are required for hardening the 2-component metallic filler for the glue and rivet repair method.
This equipment guarantees hardening of the 2-component metallic filler quickly and professionally in three work stages.
This equipment is essential to prevent adhesion problems and/or visible caving during application of the 2-component metallic filler.
The infrared lamp dries the filler, and the temperature measuring device monitors and checks the three-stage drying process of the 2-component metallic filler.
Order through BMW part ordering channel.