1.3 ARC Welding And Brazing: Notes

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: The extremely bright arc during welding may cause serious injury to the eyes if appropriate protective measures are not taken.

Use a special welding screen* for the relevant welding method (MAG or MIG).
Partition off the work bays with beam protection screens*.
Use a welding-emissions extractor facility*.
The welder must wear protective clothing* and gloves* which are suitable for welding (i.e. flame-proof).
A fire extinguisher must be located within reach of the welding area.
Do not carry out any welding work in the proximity of a fuel tank e.g. when it is installed.
Note national regulations.